-
Recent Posts
- The K40 laser – Part 2 – upgrading (aka making it work at all!)
- The K40 laser – Part 1 – commissioning
- Parts and code for the XYZ rail for Z-stacks, macro panoramas and gigapixel macro
- Macro using the Olympus FL-LM3 flash off camera
- Review of the Viltrox NF-M1 Auto Focus Nikon F-mount Lens to Micro Four Thirds M4/3 Adapter
Recent Comments
Archives
- May 2022
- March 2022
- November 2021
- January 2021
- December 2020
- July 2020
- April 2020
- March 2020
- February 2020
- January 2020
- May 2018
- January 2018
- December 2017
- November 2017
- November 2016
- October 2016
- September 2016
- August 2016
- July 2016
- August 2015
- June 2015
- May 2015
- April 2015
- March 2015
- February 2015
- January 2015
- December 2014
- November 2014
- October 2014
- December 2011
Categories
Meta
Tag Archives: CNC
The K40 laser – Part 1 – commissioning
This is not the usual sort of blog post that I make on this site. Normally, those posts are restricted to the use of electronics to enable some or other aspect of photography or just to photography or electronics alone. … Continue reading
Posted in 3D printing, laser cutting
Tagged alignment, CNC, K40, Laser cutter, reverse alignment, Vevor
Leave a comment
DIY Printed Circuit Boards – Part 2: Isolation Milling
Isolation milling is not an option available to everyone! It requires that you have a small CNC mill that has the required accuracy to mill tracks of the thickness that your design requires, and alsothe necessary software. I have a … Continue reading
Posted in electronics, Photography and electronics
Tagged CamBam, CNC, CNC conversion, diy, EasyEDA, electronics, isolation milling, Mach3, milling, PCB, printed circuit boards, Sieg, Sieg X1LP
Leave a comment